LENSER Membrane Control System (MCS)
Membrane monitoring in real time from a distance
The reliable membrane control system enables continuous function control of the running filter press. Possible leakages are indicated by a clear blue light signal without any time delay.
The blue light signal has different meanings for certain process steps during filtration. For correct interpretation, please have a look at the MCS operating manual.
General information and advantages
- Squeezing without particle dust formation
- Suitable also for high-pressure membranes
- Easy maintenance by battery change after 36 months
- Can be used in all applications due to stainless steel and polypropylene housing
- Preventive control of the membrane function by clear light signal
- Various connection options available
- Retrofitting possible for any filter press with single connection
| Approved squeezing media: | water, gas and oil |
| Possible plate formats: | 470 mm bis 2440 mm |
| Connection possibilities: | G1/2" and G3/4" |
| Minimum flow rate: | water: 10 l/min; gas: 30 m³/h; oil: 10 l/min |
| Maximum squeezing pressure: | 30 bar |
| Maximum temperature of the squeezing medium: | 100°C |
| Material composition: | stainless steel and Polypropylene housing |
| Battery type / dimensions: | 1x AA Mignon battery / 3.6 V (e.g. LS 14500 from Saft) |
| Battery life: | Up to 36 months |
| Certification: | IP 67 |